Pretty BMG PETG V1.5 – Linear Advance 1.5 Firmware

Testing a new profile for Linear Advance 1.5 for PETG and the BMG Prusa Extruder.

So far results are amazing with qualities far outside what I’ve been getting in the past using the setup. Seams are brilliant.

I’ve changed some retraction settings around and moved the linear advance gcode to the start gcode where it’s more commonly used instead of the filaments gcode.

Please test this firmware with any PETG you like and let me know how it turns out. I highly recommend the using a firmware that lowers steps to 415 on the extruder so for a 1.8 degree on the MK3 it would be a 1/16 firmware and with the 0.9 degree motor please use a 1/8 firmware.…/Build-Pr…/releases/tag/MK3_LA_190601_01

Please post results here in the comments so I can see what needs to be tweaked!!!

Summary and Profile created by Chris Warkocki



Leave a Reply